Diy
Feather-like ♡ Cattail Resin Earrings
・ White cattail
・ Crystal type silicon mold
・ LED & UV craft resin solution
https://www.kiyohara.co.jp/store/product/brand/resin-craft/led-uv-resin
・toothpick
・ UV light
・ Pin vise
・ 9 pins
・ Silver beads parts
・ Earrings or pierced earring parts
【Steps】
1. Cut the cattail
2. Put cat tail into a crystal-type silicone mold and add resin solution.
3. Remove air bubbles with a toothpick, etc., and harden it after adjusting.
4. Remove from the silicon mold and make a hole in the top with a pin vise.
5. Attach resin to a 9-pin that have been cut short, and put them in the holes made in 4 to cure.
6. Connect 9 pin and silver bead parts.
7. Connect to your favorite top such as earrings and earring hooks.
* When handling the resin, cover your hands with poly gloves, etc., so that the resin does not touch the skin.
* Use of gloves and ventilation of the room are recommended during work.
* Resin is very hot and should be handled with care.